Carton machinery daily operation manual
Date：
2022-09-23
Source：
Author：
01、Operators of carton machinery and equipment are familiar with the structure, working principle and operation methods of the equipment.
02, machine operators shall not wear gloves to operate, and shall not wear loose clothing.
03、Before starting the machine, check the paper for tools or other debris. Each time you start the ringing doorbell, you should guide the machine operator behind other responses. If you do not drive, after a while, then drive to ring the doorbell to make sure it is. When the starter is not allowed to run at high speed, the speed is zero and the speed control knob gradually reaches the rated speed.
04. In the slotting part, according to the operating procedures, slotting knife and paper cutter blade is very sharp, it is easy to hurt your hand; slotting knife falls in the middle of the slot. After adjusting the knife, pay attention to the spatula paper cutter knife. After adjusting the four knives remember to lock and tighten the screws. If there is no abnormality in the rotational processing after each tuning lock, you can continue to operate. When running at high speed, the left hand will encounter sharp edges, so be especially careful. During the production process, if you violate the operating procedures, it is very easy to cause injury.
05, version, eraser, spatula, used to remove dirt, impurities, paper or cleaning machine, should be turned off after turning on the machine, and remind people to prevent others from opening by mistake.
06. ink change, cleaning ink, do not touch the parts of the machine with your hands, wipe off the stain with a cloth.
07. roller, rubber roller, plate cylinder printing machine is the heart, the roller can not have foreign objects, can not have scratches, clean before work.
08. Regular gas, can not cut off oil or oil reduction.
09. The machine should be kept clean and work after cleaning to prevent corrosion and wear parts.
10. If the machine has any strange sound, it should stop immediately to check. The cause can be restarted.
11, maintain a sensitive and reliable device, do not remove or adjust at will, so that the device moves, if there is damage to be repaired in a timely manner.
12, the machine appearance, electric control cabinet, motor and electrical components should be kept clean, regularly check for problems, aging, timely detection of hidden problems, debugging, check the power outage.
machinery ,structure,equipment
RELATED NEWS
Carton printing machines need to be designed and used to meet
Accurate overprinting: This is one of the main indicators representing the work performance of the printing machine. In the printing process, whether at low or high speed, you can ensure that the paper delivery, handing and printing, etc. are in the specified position. This is even more important for the requirements of fine prints and color printing. This requires the drive system of the printing press, the transfer position and timing of the paper transfer, and the precision of the movement of the plate and impression press. Therefore, when we analyze printing, we must focus on understanding the various aspects related to register accuracy, grasp its characteristics and role.
2022-09-23
Carton machinery daily operation manual
Operators of carton machinery and equipment are familiar with the structure, working principle and operation methods of the equipment.
2022-09-23
Development of carton machinery
The carton machinery industry in most countries is developing rapidly, and China has successfully developed complete sets of carton machinery and equipment independently. However, corrugated board production lines, water-based printing and slotting machines, flat presses or circular die-cutting machines and other major carton machinery and equipment still have a large gap compared to the level and require continuous efforts to further improve and enhance.
2022-09-23
Service hotline
Telephone
Scan code mobile version